Constructing a Compact Cinematic Digicam from an FPV Unique is Now Attainable, Due to 3D Printing

Curious Scientist started with a Hawkeye Firefly Break up V6 Professional drone digital camera, which was designed for high-speed first individual view flying. As quickly as he bought his arms on this small 6K marvel, he began occupied with how else he might use it. With its one-inch Sony sensor, it has the flexibility to shoot some completely excellent footage from a workbench or anyplace else the place you require a transportable high-quality video resolution.

Nevertheless, issues shortly bought tough. A budget plastic C-mount adaptor that usually comes with this digital camera simply wasn’t sufficient for this man. When he tried to connect his lenses, the threads instantly stripped. Each time he appeared for alternative components, he got here up empty-handed. So he ended up sourcing an actual metallic C-mount flange from an outdated rotating CCTV digital camera. That small piece of metallic ultimately served because the framework for mounting his skilled lenses.

The following step was to place the digital camera in a casing, and Curious Scientist created a very personalized enclosure that he 3D printed to accommodate the entire elements – the sensor board and major processor board related by a cable, in addition to a keypad for the entire capabilities. So he might merely add slightly seat to carry the sensor board in place after which use an infrared filter with out utilizing any glue, as a result of he’d made slightly wedged body that additionally permits mild to enter cleanly.

The following step was to position the digital camera in a case, and Curious Scientist designed a totally personalized enclosure that he 3D printed to deal with the entire elements, together with the sensor board and major processor board, which had been related by a cable, in addition to a keypad for the entire operations. So he might merely add a small seat to carry the sensor board in place after which use an infrared filter with out requiring glue, as a result of he’d fabricated a small wedged body that additionally allowed mild to enter cleanly.

Curious Scientist didn’t need to compromise among the performance of his do-it-yourself enclosure. So he made positive to go away the USB-C, HDMI, and SD card slots uncovered, in addition to slightly customized flap he designed to cowl the ability, Wi-Fi, and report begin/cease buttons. He additionally put in a five-way joystick on the rear, which is way simpler to make use of with one hand than among the authentic buttons that had been dispersed about.

For monitoring, he created a separate 3.5-inch HDMI show in its personal 3D printed enclosure that may be seen from probably the most comfy angles. Then he mounted it to the principle physique with a chilly shoe mount, and since he didn’t need to be tethered to a battery pack, he ran a branched USB connection to separate energy and information: the fan and monitor get energy, whereas the digital camera will get information to maintain working. He created a separate 3.5-inch HDMI show with a 3D printed housing that may be seen from a number of angles. Then he used a chilly shoe mount to connect it to the principle physique, and since he didn’t need to be linked to a battery pack, he ran a branched USB connection to separate energy and information – the fan and monitor obtain energy, whereas the digital camera receives information to proceed working.

Including a top quality lens elevates this setup to the following degree, and Curious Scientist can now use that metallic C-mount to get some real adapters going – M42, Nikon F, and even microscope targets if he requires that degree of precision. Due to the sensor measurement, the sector of view might be fairly slim, which is right for getting up shut and private with electronics or perhaps a close-up {hardware} demo, because it produces a really centered and sharp picture. The outcomes are beautiful: 6K footage as crisp as you might hope for, previewing on the little display screen or an exterior recorder by way of HDMI, Wi-Fi, or simply saving on to the SD card.
[Source]