Not too long ago, I used to be working with a SOLIDWORKS drawing that had a number of sheets in it, and each potential form of view was utilized. Considered one of these views was displaying the again view when it ought to have been exhibiting the entrance view. At first, I used to be confused why I used to be seeing a corrupted SOLIDWORKS drawing view, however after a bit troubleshooting, it was straightforward to resolve.
There are a number of completely different options that might resolve the problem, so be sure you strive all of them.
Figuring out a Corrupted SOLIDWORKS Drawing View
How precisely are you aware that certainly one of your drawing views is corrupted? There are a number of signs that might level you to troubleshoot with the steps beneath as an alternative of searching down a unique trigger.
First, the SOLIDWORKS drawing view is displayed in a totally completely different orientation. Whereas troublesome to identify at a fast look, it may be a evident symptom of corruption. Second, after figuring out the inaccurate view and making an attempt to alter it, nothing really occurs. Deciding on a unique view doesn’t change the drawing view. The ultimate symptom is when altering the view, you get a warning message from SOLIDWORKS notifying you that downstream views will probably be affected.
SOLIDWORKS drawing view warning message
Three Strategies for Fixing Corrupted Drawing Views
There are usually three strategies used to repair a corrupted SOLIDWORKS drawing view. Historically, the primary two must be used, however SOLIDWORKS not too long ago launched the flexibility to make use of Z-Up templates, which means we received entry to a 3rd choice!
Technique 1: Making a Customized Drawing View
Probably the most fast manner I mounted the issue was to create a customized view. To create a customized view, press the area bar and choose the New View as indicated within the picture beneath. Within the drawing, I chosen the affected view and adjusted the orientation to the customized view.
Making a customized view
Technique 2: Resetting Views
The second methodology could be to completely reset the views within the meeting. Within the meeting, I pressed the area bar and chosen Reset Customary Views within the Orientation dialog field, as seen in the first step within the left picture beneath. The second step required me to search out the view that represented the entrance view, orient the view accurately, after which choose the Replace Customary Views button.
Resetting SOLIDWORKS views
These instructions will reset the views to the templated configuration and replace the chosen view to the present orientation, respectively. Remember the fact that when utilizing this repair, among the associated views will probably be affected, and you’ll have to reorient among the gadgets, reminiscent of element views or notes.
Technique 3: Apply Y-Up or Z-Up Modes
The third methodology lets you modify the mannequin’s view orientation by selecting both the Y-axis or Z-axis because the default up orientation. That is accomplished by urgent the area bar to open the view orientation dialog field and deciding on the Up Axis Flyout icon proven within the picture beneath.
Setting the up-axis
Deciding on both “Apply Y-Up views” or “Apply Z-Up views” will replace the view orientation for normal orthogonal, youngster, and named views with respect to the axis chosen. Photographs beneath present the change within the Proper-side view orientation for an oblong prism mannequin when deciding on both Y-up or Z-up.
SOLIDWORKS with Z-Up configuration
The troubleshooting steps above must be sufficient to allow you to begin fixing corrupted drawing views in your SOLIDWORKS drawings. Nevertheless, in the event that they don’t remedy the problem TriMech is right here to assist!
To get further help with SOLIDWORKS, contact our Technical Assist workforce right here.
