Generally, you see your SOLIDWORKS Sheet Steel flat sample displayed within the folded state. That is often attributable to the Default SM-FLAT-PATTERN derived configuration of the half file being within the folded state. The Default SM-FLAT-PATTERN configuration is a derived configuration of the sheet metallic half that’s robotically generated the primary time the sheet metallic half is positioned on a drawing.
This derived configuration ought to at all times be within the flattened state. If this derived configuration will get folded up, the flat sample view on the drawing will show within the folded state. Let’s take a look at why this occurs, discover ways to appropriate it, and tips on how to keep away from it.
Why is the SOLIDWORKS Sheet Steel Flat Sample Displayed within the Folded State?
Is that this a bug that causes the SOLIDWORKS Sheet Steel Flat Sample to get folded up? The reply to that query is “No”. This isn’t attributable to a bug within the software program and is usually attributable to a lack of knowledge of how sheet metallic flat patterns work in SOLIDWORKS. It sometimes occurs when the consumer opens the half file by right-mouse clicking on the flat sample view on the drawing and selects “Open Half”.
Opening a component from the flat sample in a SOLIDWORKS drawing
This opens the half file with the Default SM-FLAT-PATTERN configuration lively. The consumer, not realizing they’re on the Default SM-FLAT-PATTERN configuration, folds the half as much as proceed work. Since that is the configuration that the flat sample view on the drawing references, once they return to the drawing, the flat sample view reveals within the folded state.
The default Flat Sample configuration activated and flattened
How Do We Repair It?
That is simply corrected. Simply open the half file, change to the Default SM-FLAT-PATTERN derived configuration, click on the Flatten icon to place it within the flattened state, and save the file. The flattened view on the drawing ought to robotically flatten the following time it’s opened.
How Do We Forestall This in The Future?
That is simply prevented by being attentive to which configuration is lively. If the consumer opens the half from one of many folded views on the drawing, it should open to the principle configuration. In the event that they open it by right-mouse clicking on the flat sample view, they are going to want to verify to modify to the Default configuration of the half earlier than continuing.
Concerns When Working in a SOLIDWORKS PDM Setting
This conduct might present itself barely in a different way in a SOLIDWORKS PDM setting. In a PDM setting, it’s not unusual for one consumer to create the sheet metallic half file and examine it into the vault. Later, one other consumer comes alongside and creates the 2D drawing of the sheet metallic half. Now, contemplate what was talked about earlier, the Default SM-FLAT-PATTERN derived configuration is robotically added to the half file the primary time a flat sample view is added to a drawing. If that half file is checked into the vault, the consumer is not going to have write entry to the file.
Sheet Steel Mannequin within the Flattened and Folded States
Once they add the flat sample view to the drawing, it should create the Default SM-FLAT-PATTERN derived configuration within the half and permit the consumer so as to add the flat sample view to the drawing and dimension it. Nonetheless, once they shut the file, the modifications to the half file will get discarded as a result of the file is checked into the vault and read-only. The following time the drawing is opened, the consumer will get a notification that the Default SM-FLAT-PATTERN configuration can’t be discovered, and it’ll change the view reference to make use of an present configuration, which is often within the folded state.
Fixing the Flat Sample in SOLIDWORKS PDM
If you happen to see the SOLIDWORKS Sheet Steel flat sample displayed within the folded state, the result’s comparable, however the resolution is completely different. On this case, the consumer might want to shut the drawing with out saving any modifications, examine the half file out, create a brief drawing, add the flat sample view to the non permanent drawing to set off the creation of the Default SM-FLAT-PATTERN configuration, then save the half file and examine it again into the vault. The non permanent drawing could be closed with out saving. The following time the drawing from the vault is opened, it ought to discover the Default SM-FLAT-PATTERN configuration and open correctly.
To study different time-saving SOLIDWORKS Sheet Steel workflows, register for an upcoming coaching course right here.
